| |
Main Navigation |
 |
|
 |
| |
Homewood Swimming Pools & Spas |
|
Relax
pH Plus - 5kg
£17.00 including VAT
Used to increase pH of swimming pool water. |
|
 |
DIRECTIONS FOR USE
1. Acid/alkaline conditions are measured on the ‘pH’
scale which ranges from 0 to 14.
2. Ideal bathing conditions exist at a slightly alkaline
level of 7.2 to 7.6 with total alkalinity of 80/120mg/l
(ppm). This range will also allow most effective use of
other swimming pool chemicals.
3. Use a Test Kit to establish the pH value of the pool
water.
4. If the reading is below 7.2, add this product at the
rate of 500gm (18oz) per 45m3 (10,000 gallons) of pool
water. For spas add at a rate of 25gm per 2.27m3 (500
gls).
5. Always pre-dissolve the product in warm water following
the instructions below.
6. Continue filtration and re-test after approximately
24 hours.
7. If necessary, repeat treatment until a reading of between
7.2 and 7.6 is obtained.
8. The inability to maintain pH levels may indicate a
water imbalance. In such cases consult your pool specialist.
Relax pool chemicals are manufactured by Plastica in the UK and are available to buy online through our own shop.
Click below to add Relax pH Plus to your shopping cart.
|
 |
|
|
|
|
|
